Cement Test - Consistency

AIM
To determine the quantity of water required to produce a cement paste of standard consistency as per IS: 4031 (Part 4) - 1988.

PRINCIPLE
The standard consistency of a cement paste is defined as that consistency which will permit the Vicat plunger to penetrate to a point 5 to 7mm from the bottom of the Vicat mould.

APPARATUS
VICAT APPARATUS
  1. Vicat apparatus conforming to IS: 5513 - 1976
  2. Balance, whose permissible variation at a load of 1000g should be +1.0g 
  3. Gauging trowel conforming to IS: 10086 - 1982 
PROCEDURE
  1. Weigh approximately 400g of cement and mix it with a weighed quantity of water. The time of gauging should be between 3 to 5 minutes.
  2. Fill the Vicat mould with paste and level it with a trowel.
  3. Lower the plunger gently till it touches the cement surface.
  4. Release the plunger allowing it to sink into the paste.
  5. Note the reading on the gauge. 
  6. Repeat the above procedure taking fresh samples of cement and different quantities of water until the reading on the gauge is 5 to 7mm. 

REPORTING OF RESULTS

Express the amount of water as a percentage of the weight of dry cement to the first place of decimal.

Comments

Popular posts from this blog

Happy Holi 2021: Top Wishes, Messages, Quotes and Images to share with your loved ones

Movies..!

M Sand Vs River Sand

Standard Consistency Test - Test on Cement

Honeycomb in concrete – Evade and Rectification